| Here is a pair of Imex swamp dawg front tires, foams are included, these will fit all baja and desperado front wheels | Imex Front swamp dawg tires with foams, pair |
$29.99 | |
| Here is a pair of Imex swamp dawg rear tires, foams are included, these will fit all baja 5b and desperado rear wheels | Imex rear swamp dawg tires with foams, pair |
$32.99 | Back ordered |
| This is a hitec digital 5745 metal gear servo, a great replacement for the stock steering servo, features all metal gears, three ball bearings and 250 oz of torque at 6 volts. | HS-5745mg | $74.99 | |
| Here is a billet aluminum replacement left engine mount, replaces the stock pair of spacers. Made from 6061, NOT cast from pop cans like most other companies.Will fit all redcat racing rampages along with the dune runner and on road car. | python re9000 |
SALE $6.95 |
|
| Here is a pair of titanium front upper arm turnbuckles. These weight about half of stock and are much stronger than the cheap steel that comes with the truck. Will fit all redcat racing rampages along with the dune runner. will not fit rally car. | python re8000 |
$28.95 | |
| Here is a pair of titanium rear upper arm turnbuckles. These weight about half of stock and are much stronger than the cheap steel that comes with the truck. Will fit all redcat racing rampages along with the dune runner. will not fit rally car. | python re8001 |
$30.95 | |
| Here is a pair of titanium front steering turnbuckles. These weight about half of stock and are much stronger than the cheap steel that comes with the truck. Will fit all redcat racing rampages along with the dune runner. will not fit rally car. | python re8002 |
$39.95 | |
| Here is a full set of titanium front steering turnbuckles, front and rear upper arm turnbuckles. These weight about half of stock and are much stronger than the cheap steel that comes with the truck. Will fit all redcat racing rampages along with the dune runner. will not fit rally car. | python re8004 |
$84.95 | |
| This is a hitec digital 5645 metal gear servo, a great replacement for the stock throttle servo, features all metal gears, two ball bearings and 168 oz of torque at 6 volts. | HS-5645mg | $49.99 | back ordered |
| This is a hitec 645 metal gear servo, a great replacement for the stock throttle servo, meatal gear, 133 oz of torque at 6 volts. | HS-645mg | $34.99 | |
| anodized billet airfilter with built in velocity stack, comes with foam filter and pre filter. Will fit inside the redcat rampage roll cage with out mods. please oil filter just like the stock ones. Click on image to enlarge picture. | Python billet air filter | $29.95 | |
| It’s a high quality spark plug wire, terminal and color matching boot that are made to be a direct replacement to your stock plug wire found on all Zenoah and CY engines. Comes complete with glue lined heat shrink and instructions. Requires installer to remove fan cover for proper installation.Click on picture for larger image. | python wires | $12.95 | back ordered |
| Hostile is making plastic. Check out these high quality Plastic EZ Choke Levers. These parts have been strengthened with increased wall thickness. Keep an eye out for more great Hostile products soon to come. these will fit rampage tt and mt | yellow red black blue white orange |
$4.49 | |
| Plastic choke lever for operating choke on many Walbro carburetors (series WA, WT, HDA, etc). Available in a variety of colors. Zenoah part # T2070-82410. . , these will fit rampage tt and mt | yellow red black blue green orange purple |
$2.00 | |
| Aondized silver, blue, black, red or purple, billet choke handle. This unit fits perfectly on the stock carb using the stock filter. If you are using an aftermarket filter, depending on your velocity stack and your velocity gasket, you will need to either modify your velocity stack or add a second or third gaskets for adequate clearance. | rhino 6505 | $11.89 | |
| TGN fail safe and engine kill, kill the engine with the third channel <-- click for more info |
Pn#TGNfailkillswitch | $38.95 | back ordered |
| Braided fuel line cover | comes with 4 feet of steel braided cover for up to 1/4 inch lines | $11.99 | |
| Outerwears air pre filters, red, blue, yellow, purple, orange, bright green and black, this is for the redcat rampage tt, mt or hpi baja | fits over our chrome air filter kit or stock filter | $12.99 | 
| K&N PRE-FILTER SOCK, WORKS WITH ALL OF OUR AIR FILTERS, does not include air filter | #PYT0004 | $16.99 | back ordered | 
| Chrome air filter with velocity stack and gasket | PYT0002 | $20.00 |
| air filter kit carbon fiber look | Comes with filter, velocity stack, and gasket | $20.99 | |
| Here is our billet aluminum pull start case. These will fit the hpi baja 5b, 5t truck and the 5bss along with any 1/5 scale that uses a zenoah g230-260rc based engine including almost all fg, mcd, firehammer models, xtm grizzly, smartech and carson cars and trucks. Made in the U.S.A. | python billet pull start case V1 |
SALE $54.99 |
|
| Here is our new billet aluminum pull start case. These will fit all the redcat rampages, whether you have the stock engine all the way up to the 30.5. Made in the U.S.A. | python billet pull start case v2.1, bio hazard logo |
sale $54.99 |
|
| Here is our new billet aluminum pull start case. These will fit all the redcat rampages, whether you have the stock engine all the way up to the 30.5. Made in the U.S.A. | python billet pull start case , 4x4 logo |
sale $54.99 |
|
| Here is our new billet aluminum pull start case. These will fit all the redcat rampages, whether you have the stock engine all the way up to the 30.5. Made in the U.S.A. | python billet pull start case redcat racing logo |
sale $54.99 |
back ordered |
| Here is our new billet aluminum pull start case. These will fit all the redcat rampages, whether you have the stock engine all the way up to the 30.5. Made in the U.S.A. | python billet pull start case iron cross logo |
sale $54.99 |
|
| Now we have all been there when heading out to bash or race and find your pull start cord is busted or just hanging by its last thread. Well, no more!!! Pick up some Craft-Werks pull start replacement cords and never be left stranded again. Bash tested and Racer approved, this is a great replacement for the stock pull rope. Get a few while supplies last. | Craftworks Pull start rope 11638 |
$3.95 | |
| metal starter pawl, for zenoah and cy engines, NOT g2d, this is for the redcat rampage tt and mt | metal starter pawl | $12.99 | |
| billet fuel filter, red, silver blue, or purple, this is for the hpi baja 5b and the hpi baja 5b ss | billet fuel filter | $5.95 | |
| These boots are resistant to most chemicals such as gas and petroleum products, and are UV resistant to help keep them from degrading from exposure to the sun. Although the boots are a little thicker than the stockers, care is still needed when installing over dogbones with non-removable pins in order to not tear them. They come 5 to a package (an extra in case of any mishaps) Will fit redcat rampage series. |
Black Blue Red |
$11.95 | |
| Axle boots, set of 4, these will fit the redcatrampage cars and trucks | 86479 hpi | $6.99 | |
| hpi shock oil 20w (100cc), this can be used in any of the redcat rampage cars and trucks | Z182 hpi | $4.50 | |
| 3000 mah battery from hpi, lasts much longer than stock, this is for the redcat rampage tt and mt | 3000 mah from HPI | $34.00 | |
| Are you looking for more run time from your rampage? Venom's new 6v 5-Cell NiMH receiver packs come in 4200mah high power capacities to give you up to 60% more capacity over the stock receiver pack. Specifications: Battery Type: Nickel Metal Hydride (NiMH) Length: 2.67" (68mm) Height: 1.8" (46mm) Width: 1.6" (43mm) Weight: 12.8 oz (0.36kg) Plug Type: Tamiya Capacity: 4200mAh Cell Configuration: 5-Cell Hump Pack Voltage: 6V Amp Rating: 4.2 amps |
4200 mah from venom | $39.00 | Back ordered |
| Are you looking for more run time from your HPI Baja? Venom's new HPI Baja 6v 5-Cell NiMH receiver packs come in 5000mah high power capacities to give you up to 60% more capacity over the stock receiver pack. Specifications: Battery Type: Nickel Metal Hydride (NiMH) Length: 2.67" (68mm) Height: 1.8" (46mm) Width: 1.6" (43mm) Weight: 12.8 oz (0.36kg) Plug Type: Tamiya Capacity: 5000mAh Cell Configuration: 5-Cell Hump Pack Voltage: 6V Amp Rating: 4.2 amps |
5000 mah from venom | $44.99 | back ordered |
| Finally an all metal gear set, no more stripped gears, this can be used on all rampages and dune runners, but the gear ratio is suited for the mt truck | redcat racing metal gear set truck 1 x 35 tooth 3 x 25 tooth |
$47.99 | back ordered |
| Finally an all metal gear set, no more stripped gears, this can be used on all rampages and dune runners, but the gear ratio is suited for buggies | redcat racing metal gear set truck 1 x 31 tooth 2 x 25 tooth 1 x 29 tooth |
$49.99 | Back ordered |
| high response clutch and spring the High Response set engages at 8000 RPM and is fully engaged at 10,500 RPM, which launches the rampage at higher RPM for more punch off the line., this is for the redcat rampage cars and trucks |
15448 hpi | $39.99 | |
| 8000 RPM Clutch Spring for the Baja 5B allows the engine to rev to a higher RPM before the clutch engages, delivering more punch and higher engine response off the line, this will fit the redcat rampage car, buggy, and trucks | 15449 hpi | $7.99 | |
| Set of two (2) yellow steel rear shock springs for the redcat rampage cars and trucks, these normaly fit the front of the baja. Softer than stock. 135mm length, 23mm diameter, 2.1mm thick. | hpi 86756 | $12.59 | |
| harder than stock. Includes two rear springs. normaly for the front of the baja these fit the rear of the rampage cars and truck like they were ment for it135mm total length, 23mm diameter, 2.3mm thick. | hpi 86759 | $12.59 | |
| Softer than stock. this is a pair of front springs for the redcat rampage cars and trucks, normally for the hpi baja rear it comes with 2 small springs that will not be used on the rampage | hpi 86760 | $17.59 | |
| stiffer than stock. this is a pair of front springs for the redcat rampage cars and trucks, normally for the hpi baja rear it comes with 2 small springs that will not be used on the rampage | hpi 86764 | $17.59 | |
| Tgn brings us a pipe that produces unreal horse power, this pipe is not for faint hearted, if you need power then you won't be dissatisfied. Will fit redcat rampage tt and mt.Click on image to see larger picture. | tgn nickle rampage pipe | $164.95 | |
| New from DDM! Developed through months of extensive in-house testing and prototyping, and custom-designed for maximum RC performance, this new Dominator™ pipe for your Redcat Rampage Truck or Buggy will give you the power you crave. Pipe volume is optimized for huge power gains on both bottom and top end! The DDM Dominator pipe features top-quality steel alloy construction, single-piece design to minimize leakage, ultra-sturdy mounting system, and a professional matte black finish. Includes heavy duty exhaust gaskets, mounting hardware, and instructions. Pipe is covered by lifetime warranty against manufacturing defects from DDM. Fits Zenoah and Chung Yang engines installed on Redcat Rampage 4WD Trucks and Buggies. | ddm chrome Dominator rampage pipe |
$159.95 | |
| New from DDM! Developed through months of extensive in-house testing and prototyping, and custom-designed for maximum RC performance, this new Dominator™ pipe for your Redcat Rampage Truck or Buggy will give you the power you crave. Pipe volume is optimized for huge power gains on both bottom and top end! The DDM Dominator pipe features top-quality steel alloy construction, single-piece design to minimize leakage, ultra-sturdy mounting system, and a professional matte black finish. Includes heavy duty exhaust gaskets, mounting hardware, and instructions. Pipe is covered by lifetime warranty against manufacturing defects from DDM. Fits Zenoah and Chung Yang engines installed on Redcat Rampage 4WD Trucks and Buggies. | ddm black Dominator rampage pipe |
$149.95 | |
| Here is the red cat racing pipe, it is the least exspensive way to gain power.Will fit either the rampage tt or mt. Click on image to see pipe installed> | Redcat racing rampage pipe |
$59.95 | |
| HPI X-can exhaust, Billet aluminum | gives great performance over stock exhaust | $79.99 | back ordered |
| two chrome 45 degree elbos for x-can | pair | $5.99 | |
| two chrome 90 degree elbos for x-can | pair | $5.99 | |
| Blue rampage mt body, this body comes prepainted, must be trimed | blue mt body | $59.95 | |
| Redcat racing red tt body, comes prepainted, with sticker sheet | redcat racing red tt body |
$58.99 | |
| Alloy front lower a-arms, fits all redcat rampages and dune runner, will not fit rally on road | redcat racing 050001 |
$27.99 | back ordered |
| Alloy front upper a-arms, fits all redcat rampages and dune runner, will not fit rally on road | redcat racing 050012 |
$23.99 | |
| Alloy rear lower a-arms, fits all redcat rampages and dune runner, will not fit rally on road | redcat racing 050002 |
$28.99 | Back ordered |
| Alloy rear upper a-arms, fits all redcat rampages and dune runner, will not fit rally on road | redcat racing 050013o |
$28.99 | Back ordered |
| Image coming soon! | Redcat racing clear mt body, comes unpainted, with sticker sheet | redcat racing clear mt body |
$49.99 | |
| Red cat aluminum center diff mounts. Will fit rampage mt and tt. | Redcat racing 050003b |
$34.95 | |
| PICTURE COMING SOON! | blue anodized aluminum steering hub carriers. Will fit rampage mt and tt. | Redcat racing 050005b |
$29.95 | |
| Red cat racing blue anodized front aluminum knuckles. Will fit rampage mt and tt. | Redcat racing front knuckles 050006b |
$37.95 | |
| Red cat racing blue anodized front aluminum brace. Will fit rampage mt and tt. | Redcat racing front brace 050008b |
$17.95 | |
| Red cat racing universal drives, front or rear. Will fit rampage mt and tt. | Redcat racing 050009 |
$45.95 | |
| Red cat racing Aluminum Futaba Servo Mount . Will fit rampage mt and tt. | Redcat racing 050010b |
$37.95 | |
| Red cat racing Aluminum blue anodized front upper arms, these new arms have plastic sleeves pressed in so the suspension action is smoother and have less wear, pivot ball is nylon as well . Will fit rampage mt and tt and dune runner. | Redcat racing 050012b |
$37.95 | |
| Red cat racing Steering Hub Carrier (L/R) 2pcs Used with all: Rampage MT, Rampage TT, and Rampage Rally models | Redcat racing 050013 |
$15.95 | |
| Red cat racing piggy back racing shocks , FRONT. Will fit rampage mt and tt. | Redcat racing 050019 |
$54.95 | |
| Red cat racing piggy back racing shocks , REAR. Will fit rampage mt and tt. | Redcat racing 050020 |
$54.95 | |
| Red cat racing 35 tooth gear. Will fit rampage mt and tt. | Redcat racing 050027 |
$9.95 | |
| Red cat racing Diff.Joint Cups 2pcs Used with all: Rampage MT, Rampage TT, and Rampage Rally models | Redcat racing 050031 |
$13.95 | |
| Red cat racing dog bones 133mm, front or rear. Will fit rampage mt and tt. | Redcat racing 050034 |
$19.95 | |
| Red cat racing center rear diff. dog bone 170mm. Will fit rampage mt and tt. | Redcat racing 050035 |
$10.95 | |
| Red cat racing center front diff. dog bone 123mm. Will fit rampage mt and tt. | Redcat racing 050036 |
$11.95 | |
| Red cat racing Diff.Gear(25T) 3PCS Used with all: Rampage MT, Rampage TT, and Rampage Rally models | Redcat racing 050116 |
$9.95 | |
| PAIR of standard NGK plugs, will fit all cars and trucks with a zenoa / cy engine, this is for the redcat rampage tt and mt | CMR7h---- This is the NGK direct replacement | $9.99 | |
| PAIR of High performance IRIDIUM NGK plugs, will fit all fg cars and truck with a zenoa engine or our 29cc engine | NGKCR7HIX---- This is a slightly taller plug on off road cars and trucks, body mods may be required on monster truck | $15.99 | |
| 28.5cc big bore kit, top end kit, no need to replace crank, 36mm bore | #28.5ccbbkit, complete | $69.99 |